Elecro Optima Compact & Compact PLUS TITANIUM Commercial-Grade Digital 3-phase electric spa pool heater
Elecro Optima Compact / Compact PLUS TITANIUM Commercial grade digital 3 phase electric spa / pool heater - 3 year warranty
40mm plumbing unions.
Minimum flow rate of 67 LPM
Maximum flow rate of 266 LPM
Ideal flow rate of 167 LPM
Installation of these heaters requires:
Weather protection, water splash protection (away from cartridge filters, etc)
Horizontal upright mounting only either on the floor or wall mounted on a shelf.
Outlet pipe must plumb vertically UP before it can go downwards (so that the heater is not the highest point in the adjoining plumbing)
Chemical injection MUST be installed downstream only AND a non-return check valve MUST be fitted between the heater outlet and any chemical injection point.
Digital thermostat controlled with overheat protection and flow switch protection.
3 year return to base warranty.
Electric Single Phase 240v & Three Phase 415v Stand Alone Spa Heaters
- Easy Installation, floor or vertical wall mount (Titan Optima)
- Super safe operation
- Robust, durable construction
- Digital water flow signal, no pump interlock required
- Low element Watts density reduces encrustation
- Titanium heating elements zero corrosion guaranteed
- Titanium flow tube
- Dual cascade wired Schneider contactors on each element bank
- Digital timers for staged energisation
- Digital thermostat provides more accurate temperature control
- Epoxy coated aluminium cabinet (Titan Optima series)
The Titan Optima heater is manufactured from top quality components and material at the Elecro works in Hertfordshire, England.
Construction consists of three flow tubes which are fitted to the uniquely designed manifold mouldings made from specially formulated polymer alloy material. Spiral wound titanium heating elements provide a 'Vortex' water flow, these are positioned equidistantly along each flow tube, providing ultra efficient performance. The low Watts density of these elements guarantees extended life and reliability. The outlet manifold accommodates a flow switch which provides a digital signal to the control board. The inlet manifold is fitted with a titanium temperature detection pocket, fitted with NTC temperature sensor.
The heater control panel is on the top of the enclosure containing the indication and fault lights as well as the digital touch control screen. The unit can be floor or wall mounted and is supplied complete with a bracket for vertical wall mounting .
The Titan Optima heater can be easily operated using the touch screen control panel. The inlet manifold has been designed to minimise flow imbalance between the flow tubes, greatly reducing the risks of air locking. Safety and equipment protection is provided by the highly reliable flow switch, over temperature protection is provided by the four safety thermal cut outs (auto-reset) and a safety thermal cut out (manual reset).
The digital control board allows accurate control of the pool water temperature thanks to its high precision. The blue digital characters on the touch screen are clearly legible, even in bright sunlight.
To reduce voltage drop on start-up, the heater element banks are energised in a staged cascaded sequence, with a time delay between energising each bank.
Heating Elements - Titanium
Flow tubes - Titanium
Cladding panels - Moulded aluminium, epoxy powder coated
ContactorsCascade wired, Duel Schneider contactors per element bank
Digital Control Thermostat0ºC > 40ºC (0.5ºC Differential)
Safety Thermal cut-out55ºC (Manual reset)
Flow Tube Thermal cut-out60ºC (Auto reset) 1 per flow tube
Enclosure Thermal cut-out60ºC (Auto reset)
Flow Switch - Gold tipped reed switch with Titanium fulcrum pin
Wiring - High temperature, silicone sheathed, multi-strand copper conductors
Seals - High temperature special formula EPDM
Water Connections 63-mm Spigot, supplied with 2"/50mm unions
Working Pressure - 4 bar maximum
Mounting - Floor or wall mountable (Titan Optima - wall bracket supplied)