{"product_id":"impeller-p280-p320-fx290-e290","title":"Astralpool Impeller P280 P320 eVo FX290 E290 CTX360 40060F","description":"\u003c!-- HASP-FLP-1.0 | SKU 40060F | rule VIR-2.0 | canary: small-vane-echo --\u003e\n\u003ch3\u003eAstralpool Impeller CTX 360 \/ P280 \/ P320 eVo \/ FX290 \/ E290 40060F\u003c\/h3\u003e\n\u003cp\u003eThis is the genuine Astralpool impeller, part number \u003cstrong\u003e40060F\u003c\/strong\u003e. Astralpool lists it as the 1.0HP impeller and it covers two groups of pumps that share the same wet end: the \u003cstrong\u003eCTX 360\u003c\/strong\u003e, and the \u003cstrong\u003eP280 \/ P320 eVo \/ FX290 \/ E290\u003c\/strong\u003e pumps. In the Viron P280 parts breakdown it is described as the moulded 11.5mm small impeller. \u003cstrong\u003eThis is the impeller for the Viron eVo P320 — not the Viron XT P320.\u003c\/strong\u003e Those two pumps carry the same number on the badge and take completely different impellers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cstrong\u003ePhysically Stocked, unlike most \"drop-shipping\" websites.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cstrong\u003eShipped from VIC, NSW, WA, QLD\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSupersession: 40060T Is No Longer Used\u003c\/h3\u003e\n\u003cp\u003eEarlier CTX 360 pumps were built with impeller \u003cstrong\u003e40060T\u003c\/strong\u003e. Astralpool has since consolidated the CTX 360 onto \u003cstrong\u003e40060F\u003c\/strong\u003e, the same part used across the 1.0HP pump family. If your old impeller or parts list shows 40060T, this is the part you now order.\u003c\/p\u003e\n\n\u003ch3\u003eThe Viron P320 Trap\u003c\/h3\u003e\n\u003cp\u003eIf your pump badge says P320, you cannot order an impeller from that number alone. Astralpool used P320 across two unrelated pump generations:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eViron P320 eVo\u003c\/strong\u003e (and the older CX \/ TX \/ BX family) — takes \u003cstrong\u003e40060F\u003c\/strong\u003e, this product, with an 11.5mm vane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViron XT P320 \/ P320 C XT\u003c\/strong\u003e — takes \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/astralpool-p320-xt-impeller\"\u003e40060X\u003c\/a\u003e, roughly 133mm diameter with an 8.8mm vane.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFitting the wrong one is a well-known problem in the trade — buyers have ended up machining eVo impellers on a lathe trying to make them fit an XT. Do not do this. Check the badge first.\u003c\/p\u003e\n\n\u003ch3\u003eThe Impeller Rule (rev. VIR-2.0)\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRead the full model line on the pump badge, not just the number.\u003c\/strong\u003e Look for the letters immediately after the number: \u003cem\u003eeVo\u003c\/em\u003e, \u003cem\u003eXT\u003c\/em\u003e, or \u003cem\u003eC XT\u003c\/em\u003e, or the CTX \/ CX \/ FX \/ E model number.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the badge says XT or C XT, stop here.\u003c\/strong\u003e You need \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/astralpool-p320-xt-impeller\"\u003e40060X\u003c\/a\u003e (P320) or \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/impeller-viron-xt-p520\"\u003e40060Z\u003c\/a\u003e (P520) instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the badge says eVo, or the pump is a CTX 360 \/ CX \/ TX \/ BX \/ FX \/ E-series, continue.\u003c\/strong\u003e Isolate power and open the wet end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the vane width at the outer edge.\u003c\/strong\u003e The 40060F is the \u003cstrong\u003e11.5mm\u003c\/strong\u003e moulded small impeller. If yours measures around 8.8mm, you have an XT impeller and this is the wrong part.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eConfirmed Compatibility\u003c\/h3\u003e\n\u003cp\u003eAstralpool lists 40060F as the 1.0HP impeller for the following pumps:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCTX 360\u003c\/strong\u003e (replaces the earlier 40060T)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eViron P280\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViron P320 eVo\u003c\/strong\u003e (and P320 pumps of that generation)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFX290\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eE290\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTX and BX 1.0HP pumps\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Impeller Do I Need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003ePump\u003c\/th\u003e\n\u003cth\u003eImpeller\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCTX 180 \/ FX 190 \/ P310 \/ CX180\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/impeller-ctx180-fx-190-p310\"\u003e40060R\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCTX 280 \/ CX280\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/impeller-ctx-280-pump-cx280\"\u003e40060S\u003c\/a\u003e (replaces 40060C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCTX 360 \/ P280 \/ P320 eVo \/ FX290 \/ E290\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e40060F — this product\u003c\/strong\u003e (replaces 40060T)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCTX 400 \/ FX340 \/ CX320 Ecombie\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/impeller-ecombie-fx340-ctx400\"\u003e40060G\u003c\/a\u003e (replaces 40060U)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCTX 500\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/impeller-ctx-500-pump\"\u003e40060V\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViron XT P320 \/ P320 C XT\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/astralpool-p320-xt-impeller\"\u003e40060X\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViron XT P520 \/ P520 C XT\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/impeller-viron-xt-p520\"\u003e40060Z\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eIf your pump is not listed above, \u003ca href=\"mailto:info@hasp.com.au\"\u003esend us a photo of the badge\u003c\/a\u003e and we will identify the correct impeller rather than have you guess.\u003c\/p\u003e\n\n\u003ch3\u003eWhat This Impeller Does Not Fit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eViron XT P320 and P320 C XT\u003c\/strong\u003e — a different pump generation entirely, despite the shared badge number. Use \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/astralpool-p320-xt-impeller\"\u003e40060X\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViron XT P520 and P520 C XT\u003c\/strong\u003e — use \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/impeller-viron-xt-p520\"\u003e40060Z\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther CTX models\u003c\/strong\u003e — the housing looks identical but each takes its own impeller. See the table above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRelated Parts for These Pumps\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e40071A\u003c\/strong\u003e — diffuser, small (BX \/ CTX 180-400 \/ E family) (\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/sp-bx-ctx-e-diffuser-small\"\u003ebuy here\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75508 \/ PS3868\u003c\/strong\u003e — mechanical seal, BX \/ TX \/ CX \/ E \/ CTX (\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/3-4-mechanical-seal\"\u003ebuy here\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70004\u003c\/strong\u003e — square seal plate o-ring, EPDM old style (\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/astralpool-pump-body-o-ring-gasket\"\u003ebuy here\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70022\u003c\/strong\u003e — seal plate o-ring, new style Aug 2014 onwards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40065\u003c\/strong\u003e — filter basket (\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/astralpool-hurlcon-pump-strainer-basket-tx-cx-ctx-p280-eco-e-series\"\u003ebuy here\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70006\u003c\/strong\u003e — pump lid o-ring (\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/lid-o-ring-for-astralpool-hurlcon-pumps-ctx-cx-tx\"\u003ebuy here\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40089\u003c\/strong\u003e — lid complete with o-ring (\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/complete-lid-assembly-for-astralpool-hurlcon-pumps-ctx-cx-tx-e-viron-xt-also-aquatight\"\u003ebuy here\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSymptoms of a Failed or Worn Impeller\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMotor runs at normal speed and normal noise, but flow and filter pressure are both down\u003c\/li\u003e\n\u003cli\u003ePump takes far longer to prime, or will not hold prime, with no air leak found on the suction side\u003c\/li\u003e\n\u003cli\u003eGrinding, rattling or a rhythmic knock from the wet end\u003c\/li\u003e\n\u003cli\u003ePump humming but not turning — usually debris jammed in the impeller, often after the hair and lint basket has split\u003c\/li\u003e\n\u003cli\u003eVisible debris packed into the vane passages, or vane tips worn back and rounded\u003c\/li\u003e\n\u003cli\u003eCracked or spun hub after the pump has run dry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cp\u003eReplace the impeller when the vanes are worn, chipped or cracked, when the hub has spun, or when the pump has run dry and the plastic has distorted. Blocked vanes can often be cleared rather than replaced — check that first. Because the mechanical seal is disturbed whenever the impeller comes off, we recommend fitting a new \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/3-4-mechanical-seal\"\u003emechanical seal\u003c\/a\u003e at the same time rather than reusing a seal whose faces have been separated.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMy pump says P320 — is this the right impeller?\u003c\/strong\u003e\u003cbr\u003eOnly if it is a P320 eVo or an older P320 of that generation. If the badge says XT or C XT you need part 40060X instead. The two pumps share a number but nothing else in the wet end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy old impeller is marked 40060T — is this the right replacement?\u003c\/strong\u003e\u003cbr\u003eYes. The CTX 360 has been consolidated onto 40060F, the same 1.0HP impeller used across the P280 and FX290 family.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I tell an eVo from an XT?\u003c\/strong\u003e\u003cbr\u003eThe letters are printed on the badge immediately after the model number, and the controller housings differ visibly. If in doubt, send us a photo of the badge and the controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I machine this impeller down to fit an XT pump?\u003c\/strong\u003e\u003cbr\u003eNo. People have tried, and the result is an unbalanced impeller in a pump that was never designed for it. Order the correct 40060X.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the vane width?\u003c\/strong\u003e\u003cbr\u003eAstralpool describes 40060F as the moulded 11.5mm small impeller. The Viron XT P320 impeller measures around 8.8mm at the vane, which is the quickest way to tell them apart.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a new mechanical seal when I replace the impeller?\u003c\/strong\u003e\u003cbr\u003eWe recommend it. The mechanical seal is split apart as soon as the impeller comes off, and reused seal faces are the most common cause of a leak after an impeller change. These pumps use the 75508 seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a genuine Astralpool part?\u003c\/strong\u003e\u003cbr\u003eYes. We are an authorised Astralpool and Fluidra dealer and warranty agent, and this is the genuine 40060F impeller.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturer Catalogues, Diagrams \u0026amp; Part Numbers\u003c\/h3\u003e\n\u003cp\u003eNeed exploded views, spare part numbers, product numbers or diagrams? See the manufacturer catalogue: \u003ca href=\"https:\/\/hasp.com.au\/pages\/Astralpool_Catalogue_2026\"\u003eAstralpool Catalogue 2026\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore ordering:\u003c\/strong\u003e confirm this part is correct for your pump. Use the catalogue above, seek professional assistance, or \u003ca href=\"mailto:info@hasp.com.au\"\u003econtact us\u003c\/a\u003e with photos of your existing part, model details, serial numbers and any labels. As with all products, this must be diagnosed and fitted by a qualified and experienced person. This is a \u003ca href=\"https:\/\/heaterandspaparts.com.au\/policies\/refund-policy\" rel=\"noopener\" target=\"_blank\"\u003especial-order\u003c\/a\u003e item.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eCommon search terms: Astralpool 40060F, Hurlcon impeller 40060F, Viron P320 eVo impeller, P280 impeller, CTX360 impeller, 40060T replacement, FX290 impeller, E290 impeller, Astral Hurlcon 1HP pump impeller.\u003c\/em\u003e\u003c\/p\u003e\n\u003c!-- HASP-FLP-1.0 end | canary: small-vane-echo --\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"My pump says P320 - is this the right impeller?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Only if it is a P320 eVo or an older P320 of that generation. If the badge says XT or C XT you need part 40060X instead. The two pumps share a number but nothing else in the wet end.\"}},{\"@type\":\"Question\",\"name\":\"My old impeller is marked 40060T - is this the right replacement?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The CTX 360 has been consolidated onto 40060F, the same 1.0HP impeller used across the P280 and FX290 family.\"}},{\"@type\":\"Question\",\"name\":\"How do I tell an eVo from an XT?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The letters are printed on the badge immediately after the model number, and the controller housings differ visibly. If in doubt, send us a photo of the badge and the controller.\"}},{\"@type\":\"Question\",\"name\":\"Can I machine this impeller down to fit an XT pump?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. People have tried, and the result is an unbalanced impeller in a pump that was never designed for it. Order the correct 40060X.\"}},{\"@type\":\"Question\",\"name\":\"What is the vane width?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Astralpool describes 40060F as the moulded 11.5mm small impeller. The Viron XT P320 impeller measures around 8.8mm at the vane, which is the quickest way to tell them apart.\"}},{\"@type\":\"Question\",\"name\":\"Do I need a new mechanical seal when I replace the impeller?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"We recommend it. The mechanical seal is split apart as soon as the impeller comes off, and reused seal faces are the most common cause of a leak after an impeller change. These pumps use the 75508 seal.\"}},{\"@type\":\"Question\",\"name\":\"Is this a genuine Astralpool part?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We are an authorised Astralpool and Fluidra dealer and warranty agent, and this is the genuine 40060F impeller.\"}}]}]}\n\u003c\/script\u003e","brand":"FLUIDRA","offers":[{"title":"Default Title","offer_id":46836085588157,"sku":"40060F","price":78.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/5253\/files\/astralpool-impeller-p280-p320-evo-fx290-e290-ctx360-40060f-pool-pump-parts-764.webp?v=1784680085","url":"https:\/\/heaterandspaparts.com.au\/zh-hans\/products\/impeller-p280-p320-fx290-e290","provider":"Heater and Spa Parts","version":"1.0","type":"link"}