{"product_id":"sn-sv3t-md","title":"Spanet XS3000 SV Style Touchpad and Overlay","description":"\u003cp\u003e\u003cstrong\u003eSpanet XS-3000 SV Style Touchpad and Overlay \u003c\/strong\u003e- replaces \u003ca rel=\"noopener\" href=\"https:\/\/heaterandspaparts.com.au\/products\/spanet-xs-3000-touch-pad\" target=\"_blank\"\u003eolder style touchpads like this.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIf retrofitting the older style of Spanet XS touchpads, you will need a 76mm hole saw and an angle grinder or hacksaw type tool. \u003c\/p\u003e\n\u003ch3\u003eKeypad Installation Instructions\u003c\/h3\u003e\n\u003cp\u003eSelect a suitable keypad mounting location that:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIs above the spa’s maximum water level.\u003c\/li\u003e\n\u003cli\u003eIs easily accessible to the spa user.\u003c\/li\u003e\n\u003cli\u003eProvides adequate drainage so water cannot accumulate on or around the keypad.\u003c\/li\u003e\n\u003cli\u003eAllows sufficient clearance beneath the spa cover so the cover does not rest directly on the keypad.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore Cutting the Spa Shell\u003c\/h3\u003e\n\u003cp\u003eBefore drilling or cutting the keypad opening, hold the keypad in the proposed location and confirm that the cable is long enough to reach the spa control pack.\u003c\/p\u003e\n\u003cp\u003eThe cable must not be stretched, placed under tension or pulled across sharp edges.\u003c\/p\u003e\n\u003ch3\u003eCut-Out Dimensions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eDrill two \u003cstrong\u003e76 mm diameter holes\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eSpace the holes \u003cstrong\u003e71 mm apart, measured centre to centre\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eCut out the remaining material between the two holes to form the complete keypad opening.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eRefer to the supplied installation diagram for the correct hole layout and cut-out shape.\u003c\/p\u003e\n\u003ch3\u003ePreparing the Mounting Surface\u003c\/h3\u003e\n\u003cp\u003eClean the mounting surface thoroughly to remove:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirt and dust\u003c\/li\u003e\n\u003cli\u003eOil\u003c\/li\u003e\n\u003cli\u003eGrease\u003c\/li\u003e\n\u003cli\u003eMoisture\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the keypad adhesive to bond correctly, the spa shell must have a \u003cstrong\u003eclean, smooth and completely dry surface\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstalling the Keypad\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePeel the paper backing from the adhesive gasket, ensuring the entire adhesive surface is exposed.\u003c\/li\u003e\n\u003cli\u003eFeed the keypad cable through the prepared opening.\u003c\/li\u003e\n\u003cli\u003eCarefully align the keypad with the cut-out.\u003c\/li\u003e\n\u003cli\u003ePress the keypad firmly onto the mounting surface.\u003c\/li\u003e\n\u003cli\u003ePress evenly around the entire outside edge to ensure the keypad is fully adhered to the spa shell.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv style=\"border: 2px solid #d97706; background: #fff7ed; padding: 16px; margin: 20px 0;\"\u003e\n\u003ch3 style=\"margin-top: 0;\"\u003eImportant Installation Notes\u003c\/h3\u003e\n\u003cul style=\"margin-bottom: 0;\"\u003e\n\u003cli\u003eThe keypad mounting area must have adequate drainage to prevent water accumulating on or around the keypad.\u003c\/li\u003e\n\u003cli\u003eWhere the keypad is mounted beneath a spa cover, allow sufficient clearance so the cover does not rest directly on the keypad.\u003c\/li\u003e\n\u003cli\u003eParts incorporating electrical components, including keypads, must be securely installed so they cannot fall into the spa or bath.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eApplicable Models:\u003c\/strong\u003e SV3.T and SV4.T\u003c\/p\u003e","brand":"SpaNet","offers":[{"title":"Default Title","offer_id":47125961638077,"sku":"SN-SV3T-MD","price":597.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/5253\/files\/spanet-xs3000-sv-style-touchpad-and-overlay-118.webp?v=1782868100","url":"https:\/\/heaterandspaparts.com.au\/zh-hant\/products\/sn-sv3t-md","provider":"Heater and Spa Parts","version":"1.0","type":"link"}