Davey SpaQuip Spa Power SP 601 Circuit Board kit - SP601

Davey Spaquip Spa Power 601 PCB kit with AMP wiring harness. Kept in stock. Pick-up or Fast Delivery available. Suits SP601 control systems with same PCB style. Images show various revisions. Latest revision is V8.

This PCB is supplied complete with wiring harness for all Spa Power 601 spa packs fitted with old-style heaters or new heaters, due to a software & hardware modification that prevents just the PCB only being replaced.

Download Wiring Diagram (V8) Here

Notes: 

• Before replacing this PCB, Isolate Power, then unplug Lights & Blower Speed control cable. Switch on power and see if PCB starts working. In some cases, a faulty light or blower can cause the PCB to 'power down' and be completely unresponsive.
• We recommend only Suitably-Qualified & Experienced persons carry out this work. If in doubt, send your control box to us for upgrades.
  
• If you have an older SP 600 / Spa Power 600 controller, you will need to purchase a new SP600 Box listed here.

New Style Wiring:

• Orange/Brown wires w/ 1 Spade to one side of the Klixon
• White wire w/ 2 Spades goes from POH to Active Heater Terminal, then across to the other side of the Klixon
• Thicker White wire from Relay goes to Neutral Heater Terminal

SP600 PCB, SP601 PCB, Spa Power 600 PCB, Spa Power 601, SP 601 PCB, SP 600 PCB, Q846601-10TSP

Other Davey SpaQuip SP600/SP601 Parts:

• Complete Control System
• Touchpad: Oval / Rectangular
• PCB Circuit Board
• Heater Element Assembly
• Optical Sensor
• External Timer
• Replacement Internal Timer
• LED Light
• Internal Temp Sensor
• Barrel Plumbing Unions
• Union O-rings