MCH19 Stoked Stainless Spas 19 sqft Filter Cartridge - 203mm x 118mm

Spatex MCH19 Stoked Stainless Spas 19 sqft Filter Cartridge - 203mm x 118mm

Spatex MCH19 replacement pleated filter cartridge, made in New Zealand by Magnum Filters. This is the 19 sqft top load cartridge used across the Stoked Stainless spa range.

• Physically Stocked, unlike most "drop-shipping" websites.
• Shipped from VIC, NSW, WA, QLD

Spatex filter cartridges are manufactured by Magnum Filters in New Zealand. Magnum have been producing spa and pool filter cartridges since 1982 and supply OEM and co-branded cartridges to spa manufacturers and distributors worldwide. These are not low-grade generic filters - they use quality pleated filtration media for reliable water flow, solid dirt-holding capacity and consistent service life, and are used throughout the Australian spa industry alongside WWDG and SpaPro style filters.

Specifications

• Height: 200mm to 203mm
• Outside diameter: 118mm
• Top: Closed top with handle
• Bottom: 46mm OD fine thread spigot
• Filter area: 19 sqft
• Spatex part number: sx-CH19
• Magnum part number: MCH19
• Country of manufacture: New Zealand

Also Known As

This cartridge is sold under a number of OEM, distributor and aftermarket part numbers, including: MCH19, CH19.

Commonly Suits

• Stoked Stainless spas using the 19 sqft top load cartridge
• Other spas sharing the same 118mm top load housing

Spa brand alone is not enough to identify a filter. Manufacturers frequently change filtration systems between models and production years, so always compare your existing cartridge before ordering.

Before You Order

The Stoked range also uses a longer 30 sqft cartridge at 296mm. Measure the overall length of your existing cartridge before ordering.

Measure the overall length, the outside diameter, the top style and the bottom connection and compare them against this listing. If you are unsure, send us a photo and the measurements of your old cartridge and we will confirm the correct replacement.

Filter Replacement Guide

Spa filters should generally be replaced every 1 to 2 years, depending on usage, water quality, chemical balance and cleaning routine. Rinsing the pleats regularly and soaking the cartridge in a dedicated filter cleaner will extend its working life between replacements.