MCH30 LA Spas / Stoked Stainless 30 sqft Filter Cartridge - 296mm x 118mm - Spatex by Magnum

Spatex MCH30 LA Spas / Stoked Stainless 30 sqft Filter Cartridge - 296mm x 118mm

Spatex MCH30 replacement pleated filter cartridge, made in New Zealand by Magnum Filters. This is the 30 sqft top load cartridge used across the Stoked Stainless spa and plunge pool range and on LA Spas systems using the same housing.

• Physically Stocked, unlike most "drop-shipping" websites.
• Shipped from VIC, NSW, WA, QLD

Spatex filter cartridges are manufactured by Magnum Filters in New Zealand. Magnum have been producing spa and pool filter cartridges since 1982 and supply OEM and co-branded cartridges to spa manufacturers and distributors worldwide. These are not low-grade generic filters - they use quality pleated filtration media for reliable water flow, solid dirt-holding capacity and consistent service life, and are used throughout the Australian spa industry alongside WWDG and SpaPro style filters.

Specifications

• Height: 296mm
• Outside diameter: 118mm
• Top: Closed top with half round handle
• Bottom: 46mm OD MPT fine thread spigot
• Filter area: 30 sqft
• Spatex part number: sx-CH30
• Magnum part number: MCH30
• Country of manufacture: New Zealand

Also Known As

This cartridge is sold under a number of OEM, distributor and aftermarket part numbers, including: MCH30, CH30, Top Load 30.

Commonly Suits

• Stoked Stainless - Hybrid Spa, Round Spa 1.6m, Round Spa 1.9m (6 person), Round Spa 2.2m (8 person), Square Spa 2m x 2m
• Stoked Stainless Plunge Pool 2m x 2.5m and 2m x 3m
• LA Spas and other spas using the same 118mm top load cartridge

Spa brand alone is not enough to identify a filter. Manufacturers frequently change filtration systems between models and production years, so always compare your existing cartridge before ordering.

Before You Order

The 46mm MPT bottom fitting is a FINE thread, not a coarse thread. Compare the thread style on your existing cartridge before ordering.

Measure the overall length, the outside diameter, the top style and the bottom connection and compare them against this listing. If you are unsure, send us a photo and the measurements of your old cartridge and we will confirm the correct replacement.

Filter Replacement Guide

Spa filters should generally be replaced every 1 to 2 years, depending on usage, water quality, chemical balance and cleaning routine. Rinsing the pleats regularly and soaking the cartridge in a dedicated filter cleaner will extend its working life between replacements.