Balboa SpaTouch 2 Trapezoid Touchpad - Colour Touchscreen

Balboa SpaTouch 2 Trapezoid Touchpad - Colour Touchscreen

Balboa SpaTouch 2 trapezoid touchscreen touchpad / topside control panel with overlay decal. This is the later larger-screen replacement for older Balboa SpaTouch trapezoid panels, and is commonly used on Balboa BP series spa control systems.

• Physically Stocked, unlike most "drop-shipping" websites.
• Shipped from VIC, NSW, WA, QLD

Note: The square SpaTouch 2 version listed here may also be used in some conversions, but the spa shell cut-out may need modification

This Balboa SpaTouch 2 touchpad suits many spas using Balboa BP controllers, and is commonly found on brands such as Signature Spas, Spa Industries, Cyclone Spas, Maax, and many others. It is a trapezoid-shaped panel with rounded corners, colour touchscreen display, and 4-pin connection.

Important compatibility note: This panel is designed for Balboa BP systems that already support the Spatouch, TP800 and/or TP900 interface. It is commonly suitable for systems such as BP200 G1, G2, G3, BP200UX, BP600, BP601 3G1 / 3G2 / 3G3, SIBP601X, BP21, Dominator, and BP2100 systems. Always confirm plug type, cut-out size, and original touchpad style before ordering.

The large colour display gives easy access to spa functions and operating information including temperature, pump status, blower status, filtration cycles, ozone status, messages, and alerts. It is a premium Balboa touchscreen interface and a popular upgrade path when replacing failed or obsolete trapezoid panels.

Common reasons these touchpads fail

• Being stepped on or having excessive pressure applied to the screen
• Repeatedly pressing too hard
• Long-term sun exposure / UV damage
• Incorrect installation angle allowing excess moisture or water exposure

Dimensions & details

• Face size: approx. 197-198mm x 120-121mm
• Cut-out / hole size required: approx. 120mm x 90mm
• Plug type: 4 pin
• Cable length: 3 metres
• Warranty: 12 months
• Common part / reference numbers: 57324, 50584, 50585, 50390, 50391, ACOPSPATNE and others

Replacement notes

• Replaces many older Balboa SpaTouch trapezoid panels
• Commonly used where the original system already supports TP800 or TP900
• The square SpaTouch 2 version may also be used in some conversions, but the spa shell cut-out may need modification
• When replacing older obsolete panels, the spa shell hole size or shape may need to be altered

Important installation information

• Do not fit this touchpad where the spa cover can press on the screen.
• Do not fit it where users may stand, fall, or lean heavily on it.
• Do not leave it exposed to harsh sun for long periods where avoidable.
• Balboa recommends installation on the outside / exterior portion of the spa shell, angled away from the water.
• If mounted on the interior side of the shell, the panel face should still be angled away from the spa water.
• Flat mounting, or mounting angled toward the water, is not to Balboa’s recommended specification.
• Some imported spas were fitted with these panels in less-than-ideal positions from new.
• Warranty may not apply where installation is outside manufacturer recommendations, or where physical pressure / water ingress damage is evident.

Audio compatibility note

Note: Some older Balboa BBA audio systems may not remain compatible with newer replacement touchpads. If your spa has Balboa audio, confirm your exact setup before ordering.

Need help identifying yours?

Not sure if this is the correct Balboa SpaTouch 2 trapezoid touchpad? Send us a clear photo of your existing panel, plug, and spa pack label, and we will help confirm the right replacement before you order.

Instruction Manual / User Guide