Balboa BP8 Universal Retrofit Spa Control Pack - 3.0kw

Balboa BP8 Universal Retrofit Spa Control Pack - 3.0kw

Balboa BP8 Retrofit Spa Pack (Complete with Inline Heater) - The most "universal" spa control system on the market. Replaces all BP series controllers such as BP601G1, BP6013G1, BP6013G2, BP6013G3, Dominator, and SIBP601X. Additionally, it can often be used to replace the GS and GL series (with a new touchpad), as well as other models like Revolution, Colossus, and Viper.

• Physically Stocked, unlike most "drop-shipping" websites.
• Shipped from VIC, NSW, WA, QLD

This versatile retrofit pack is designed to replace a wide range of Spa control systems. It offers 18 different setup configurations.

Supports the following configurations - Switched / controlled outputs (up to 8):
- See Setup Table (Image 2)

• Pump 1 (can be 2-speed in many setups; sometimes configured as 1-speed)
• Pump 2 (1-speed)
• Pump 3 (1-speed)
• Blower (1-speed)
• Circulation pump (1-speed, runs filtration cycles/polling)
• Ozone (either slaved to circ in circ-setups, or independent in non-circ setups)
• Spa light
• Heater (3.0kW)
• Plus 1 always-on accessory feed (not “controlled”) eg: AV

WiFi & Smart Device Compatibility:

• Works with BWA WiFi module (sold separately) for smartphone control
• Compatible with CMS WiFi and SpaTouch 4 modules

Documentation: Technical Manual

Topside Panel Compatibility:
Compatible with Balboa TP-series touchpads (some touchpad options may depend on output configuration), including:

• TP200
• TP400
• TP500
• TP600
• TP700 / TP740
• TP800 (colour touchscreen)
• All SpaTouch touchscreen panels:
  • Spatouch Mini, Spatouch 3 - 5", Spatouch 3 - 7", Spatouch 4

Installation Notes:

• Touchpad hole will need to be modified for most touchpad types
• 32A max load (single phase), 16A max (three phase)
• If using 3 jet pumps, it may be necessary to limit to 2 pumps running simultaneously depending on amperage draw

Important:

• Ensure compatibility with your existing system before purchase
• Not compatible with Microsilk systems
• Programming must be completed before connecting any two-speed pump