Balboa SpaTouch 2 - Square Icon Touchscreen Touchpad - 173mm x 145mm - Trapezoid & 2t Replacements

Balboa SpaTouch 2 - Square Icon Touchscreen Touchpad - Trapezoid & 2t Replacements

Balboa SpaTouch2 Square Icon Touchscreen Touchpad. Compatible with all BP controllers. Comes with colour display and Molex plug with 6 to 4 pin Molex plug adaptor provided.
This touchpad replaces all older 57320, 52777, 57329, 57179 model numbers.

• Physically Stocked, unlike most "drop-shipping" websites.
• Shipped from VIC, NSW, WA, QLD

Commonly used to replace the Trapezoid-style and Spatouch 2t touchpad with hole cut out to suit. If you have a 4-pin plug, the included 6-pin adaptor can used.

Compatible with:

• BP200 G1, G2 and G3
• BP600
• BP601
• BP6013 G1, G2 and G3
• BP8 & SpaPro™
• Dominator™
• BP2100 G1, G2 and G3
• WWDG™ PB
  
• Note: Older Balboa BBA Audio systems are no longer compatible with new touchpads. As a result, you will lose audio functions with any new touchpad.

Dimensions:

• Touchpad: 173mm x 145mm
• Hole cutout: 147mm x 94mm
  • old Trapezoid style was 120mm x 90mm
    
  • old Spatouch 2t style was 123mm x 82mm

Important Information:

• Do not fit this touchpad where the spa cover can press on the touch screen.
• Do not leave touchpad exposed to sun for long periods.
• Balboa recommends installation on the outside/exterior portion of the spa shell, angled away from the water.
• If fitted on the interior portion of the spa shell, the panel surface should be on an angle away from the spa water.
  
• Flat, or angled in the direction of the spa water, installation in this position is not to specification.
• Some Chinese spa manufacturers fitted these touchpads against Balboa’s guidelines. See listing images.
• Warranty may not apply where installed outside Balboa’s specifications.
• The spa cut-out hole may need modification when replacing older obsolete touchpads.
• User/Installation Manual