OBSOLETE - Replace with Interchangeable Jets Listed Here

Edgetec JetEx white adjustable spa bath jet. Jet face diameter - 70mm. Twist to remove
Used on Lanark spa baths, Round Bath Company Spa Pools, and others. 

Removal: Twist clockwise hard and it should pop forward. Then pull out. Or use this tool. Jets may be stuck with age, so persistance is key. If using anything to pry them forward, ensure you protect the bath and the body fitting.  Do not pry on the body fitting behind jet.

Do not turn hard anti-clockwise as you may remove the threaded part of the jet body that's glued into the bath. If you remove the threaded part of the body you will need to re-silicone glue it back in place.

Note: If the replacement jet does not fully seat into the jet body, its likely your bath has the original slightly different version. In order to seat the jet face fully into the jet body, you may need to trim the 'easy out' tab shorter (see image).

72mm