Davey SpaQuip Spa Power SP 601 Circuit Board kit - SP601

Davey Spa-quip (SpaQuip) Spa Power SP 601 Circuit Board kit - SP601

This PCB is supplied complete with wiring harness for all Spa Power 601 spa packs fitted with old-style heaters or new heaters, due to a software & hardware modification that prevents just the PCB only being replaced.

• Physically Stocked, unlike most "drop-shipping" websites.
• Shipped from VIC, NSW, WA, QLD

Download Wiring Diagram (V8) Here

Notes:

• Before replacing this PCB, Isolate Power, then unplug Lights & Blower Speed control cable. Switch on power and see if PCB starts working. In some cases, a faulty light or blower can cause the PCB to 'power down' and be completely unresponsive.
• We recommend only Suitably-Qualified & Experienced persons carry out this work. If in doubt, send your control box to us for upgrades.
  
• If you have an older SP 600 / Spa Power 600 controller, you will need to purchase a new SP600 Box listed here.

New Style Wiring:

• Orange/Brown wires w/ 1 Spade to one side of the Klixon
• White wire w/ 2 Spades goes from POH to Active Heater Terminal, then across to the other side of the Klixon
• Thicker White wire from Relay goes to Neutral Heater Terminal

SP600 PCB, SP601 PCB, Spa Power 600 PCB, Spa Power 601, SP 601 PCB, SP 600 PCB, Q846601-10TSP

Other Davey Spa-quip SP600/SP601 Parts:

• Complete Control System
• Touchpad: Oval / Rectangular
• PCB Circuit Board
• Heater Element Assembly
• Optical Sensor
• External Timer
• Replacement Internal Timer
• LED Light
• Internal Temp Sensor
• Barrel Plumbing Unions
• Union O-rings