Australia’s spa controller replacement & retrofit specialists

Heater & Spa Parts helps spa owners, builders and technicians replace faulty, water-damaged, obsolete and unknown-brand spa control systems (control boxes / spa packs), touchpads, keypads and control pads right across Australia. We’re a real store holding physical stock with fast Australia-wide shipping — not a drop shipper — and an authorised dealer and service agent for the major spa control brands.

The finder above covers common replacement paths only — it is not a complete list. We supply and match far more controllers, touchpads, keypads, heaters, sensors, leads, pumps, lights and retrofit kits than are shown here, including current, obsolete, imported, rebadged and unknown-brand systems. Can’t see yours? Choose “Help me work it out” in the finder or send photos. Browse all spa control systems & parts, touchpads & control panels and complete control systems.

How the right replacement is chosen

The correct controller is matched to the equipment inside the spa — not the brand on the cabinet, shell or touchpad. The same spa brand has used different control systems over the years, and many imported spas run generic or rebadged systems. The match is made from:

• Number of water pumps
• 1-speed or 2-speed pumps
• Dedicated circulation pump
• Air blower
• Heater size & plumbing layout
• Touchpad type & cable plug
• Light type & voltage
• Ozone / UV sanitation
• Plug types (AMP, Mini J&J, C38, Gecko in.link)
• Available cabinet space
• Existing plumbing position

What we need to match your controller

Send clear photos of the control box label, the touchpad / keypad / control pad, the wiring area (if safe), the full equipment bay, pump labels, the heater assembly, any blower / circulation pump / ozone / UV gear, and the existing plug types. If the brand is unknown, that’s normal — we match from the equipment, not the badge.

Signs your controller or touchpad needs replacing

• Blank, flickering or dead touchpad
• Spa trips the breaker / RCD
• Trips when the heater starts
• No heat, or won’t hold temperature
• Pump, blower or light won’t switch
• Sensor, flow or overheat error codes
• Burning, corrosion, water or insect damage
• Buttons unresponsive
• Stuck in one operating mode
• Obsolete, with no direct replacement

If the control box still works and only the topside panel has failed, you may only need a compatible touchpad. If the controller is obsolete or damaged, a complete control box and matching touchpad kit is usually the answer.

Spa control systems, controllers & touchpads we replace

A guide to what we supply and match — current, older, obsolete, imported and rebadged. This is a guide, not a complete catalogue. Model and part numbers vary by region, voltage, software, heater size, plug layout and the spa maker’s original specification, so always confirm before ordering.

Spa brands that use these control systems

The badge on the cabinet rarely identifies the controller inside. Many spa brands have used Balboa, Gecko / Aeware, Davey Spa-Quip, SpaPower, SpaNet, Joyonway, Ethink or imported systems. We help match controllers, touchpads, keypads and retrofit kits for spas sold under brands including, but not limited to:

• Signature Spas
• Bullfrog Spas
• Maax Spas
• Heritage Spas
• Lanark Spas
• Sapphire Spas
• Monarch Spas
• Alpine Spas
• Artesian Spas
• Caldera Spas
• Cyclone Spas
• Decina
• Designer Spas
• Dimension One Spas
• Endless® Spas
• Fisher Spas
• Halo Spas
• HotSpring Spas
• Impact Spas
• Jacuzzi
• Just Spas
• LA Spas
• Leisurite Spas
• O2 Spas
• Oasis
• SCS Spas
• Spa Industries
• Spas Direct
• Sunrans
• Sundance Spas
• Vortex®

This doesn’t mean every model from every brand has a direct replacement — some are obsolete, modified, rebadged or software-specific. Where there’s no like-for-like, a current control box and matching touchpad kit is usually the best path.

Obsolete, discontinued & retrofit control systems

Many older spa control systems are no longer available as a direct, like-for-like replacement — but that rarely means the spa is finished. Where suitable, we match obsolete Balboa, Spa-Quip / SpaPower, SpaNet, Gecko / Aeware, Joyonway, Ethink, Ampac, Pulsar, imported and unknown-brand systems to a current replacement control box and matching touchpad kit. A retrofit may need changes to plumbing, wiring, touchpad mounting, lights or accessories, and must be carried out by a qualified person.

How the spa controller finder works

1. Choose I know my current control brand and pick your brand — Balboa, Davey / Spa-Quip, SpaNet, Gecko / Aeware and more.
2. Select your model, or answer a couple of quick questions about your pumps, blower, light and accessories.
3. Get a matched controller and compatible touchpad where available — add to cart, or email the match to confirm before you buy.
4. Not listed, imported, obsolete or unknown? Choose Help me work it out and send photos for manual matching.

Spa controller replacement FAQs

How do I find the right replacement spa controller?

Select your current control brand if you know it, then choose your model or answer a couple of questions about your pumps, blower and light. If you don’t know the brand, choose “Help me work it out” and send photos. The controller is matched to the equipment fitted inside the spa, not the spa brand name.

Are spa controllers universal?

No. A spa controller must be matched to the pumps, heater, touchpad, keypad, lights, blower, ozone, UV system, sensors and accessories fitted to the spa. The brand on the cabinet alone usually isn’t enough to identify the correct controller.

Can I replace just the spa touchpad?

Sometimes. If the control box still works and only the topside panel has failed, a compatible replacement touchpad may be possible. If the control box is obsolete, faulty or water-damaged, a complete controller and touchpad kit is usually required.

Can you match an old, obsolete or discontinued spa controller?

In many cases, yes. Send clear photos of the existing controller, touchpad, equipment bay and pump labels, and we can usually identify whether a direct replacement, a compatible touchpad, or a retrofit controller and touchpad kit is the best option.

What if my spa control brand isn’t listed in the finder?

That’s common — many spas use imported, rebadged or discontinued systems. Choose “Help me work it out” or email photos of your control box and touchpad to info@hasp.com.au and we’ll match a replacement.

Do you only supply the controllers shown in the finder?

No. The finder shows common replacement options only. It is not a complete catalogue — we supply many more controllers, touchpads, keypads, retrofit kits and parts, and can manually match many systems that aren’t shown online.

Which spa control brands does Heater & Spa Parts stock or help replace?

We stock, supply and match many systems, including Balboa, Davey Spa-Quip / SpaPower, SpaNet, Gecko / Aeware, Joyonway, Ethink, Ampac, Pulsar, Onga, Waterco Portapac, imported Chinese systems and unknown or rebadged controllers. The exact replacement depends on the equipment fitted to your spa.

Will a new spa controller fit my existing spa?

Like-for-like replacements usually fit closely, but it isn’t guaranteed. Retrofit systems may need replumbing, electrical changes, a different touchpad or light connection, or changes to the equipment bay. A licensed electrician or qualified spa technician should install the system.

What photos do you need to match my controller?

Photos of the control box label, the touchpad or keypad, the full equipment bay, the pump labels, the heater assembly, the wiring and plug connections (if safe to photograph), and any blower, circulation pump, ozone or UV equipment.

Can I install a spa controller myself?

Spa controllers involve mains electrical wiring and must be installed by a qualified person in accordance with Australian electrical requirements.

My controller isn’t listed — can Heater & Spa Parts still help?

Yes. If your controller, touchpad, keypad, control pad, topside panel, spa pack or control box isn’t listed, we may still be able to help. Many spas use unknown, imported, rebadged or discontinued systems. Send clear photos of the control box label, touchpad, wiring area, pump labels, heater and full equipment bay so we can check whether a direct replacement, compatible touchpad or retrofit kit is suitable.