Astralpool / Hurlcon Remote Heater Thermostat Touchpad Controller

This controls Hurlcon & Astralpool HX, JX, WX, and MX series gas heaters remotely. This is the touchpad thermostat that can go inside the house, wall-mounted, or elsewhere to switch the heater on/off and adjust the temperature. These are not recommended to be fitted out in the weather. They should be protected from direct sunlight and moisture.

This is a very simply wired remote. It controls HX, MX, JX, WX, HiNRG, Viron heaters remotely, providing ON/OFF and temperature settings for the heater. It does not switch on pumps, have timers, or any other real function.

Note that in some cases, it appears that it may not work. This means that either the control system, or heater, needs to be switched into Slow Comms.

To Switch the Heater to Slow Comms:

1. Make sure Power is switched On @ Power Point
2. Turn power Off on heater @ Touchpad
3. Press & Hold On/Off button & press UP, UP, UP, DOWN (Make sure to Hold On/Off button while doing the UP UP UP DOWN sequence.)
4. Switch to Slow Comms.

Note on switching to Slow Comms: Temperature might show 0° on the remote. Press a button to show temperature. Cycle power anytime you suspect an issue.

Cannot be used in conjunction with a Connect 10.