Coming Soon - BWT Aquabot Wave Cordless Robotic Pool Cleaner - Pools to 15m

Name: Coming Soon - BWT Aquabot Wave Cordless Robotic Pool Cleaner - Pools to 15m
Brand: BWT
Price: 1499.00 AUD
Availability: InStock

FREE SHIPPING OVER $149 (T&Cs)

$1,499.00

Tax included Shipping calculated at checkout.

Don't Guess - Ask Us!

Not sure if it’s the right part? Send us a message and a photo of what you’re replacing, or what you need, and we’ll help make sure you get the right part the first time.

Delivery and Shipping Info*

Free Shipping over $99 for most products. Choose Express Post for fastest shipping!

Free, Flat Rate & Express Post Shipping Information.

BWT Aquabot Wave Cordless Robotic Pool Cleaner

Dual ultrasonic radar navigation, extra-wide brushes and a 6.5L dual basket, for pools up to 15m.

Physically Stocked, unlike most 'drop-shipping' websites.
Shipped from VIC, NSW, QLD, WA

The Aquabot Wave is the largest cordless robot in the BWT lineup. It runs a bigger 9300mAh battery than the ES Echo for a longer cycle, a 6.5L dual filtration basket so it can be left to work without filling up, and extra-wide brushes that cover more ground per pass.

Dual ultrasonic radar navigation is the standout - two sensors give it a far better read on walls, steps and obstacles than a single-sensor robot, which shows up in coverage on irregular pool shapes.

Key Features

Wi-Fi and Bluetooth with app
SmartPark retrieval system - parks at the wall for easy lifting
Suction rate - 15,000 litres per hour, 250 lpm
2.5 to 3.5 hour runtime from a 9300mAh battery
3 to 4 hour charge
Programming via the app or the robot control panel
Cleaning modes - floors, walls and waterline
6.5 L dual basket filtration - 180 and 85 micron
Dual ultrasonic radar navigation
Extra-wide brushes

Specifications

Suits pools to: 15m
Power: cordless, 9300mAh rechargeable battery
Filtration: dual basket, 6.5 L
Weight: 10.3kg

Control Panel

App control - select cleaning mode and duration, unlock additional features
Floor, wall and overall modes - run the selected mode for 2 hours by default, then autopark to the nearest wall when complete or when battery drops below 10 percent
Light ring - green 50 to 100 percent, yellow 25 to 50 percent, red 0 to 25 percent, blue means ready to drop into the water. Flashing indicates charging

Warranty

2 years, with an optional third year available through the BWT cordless robot extended warranty programme

Note: Charge the battery fully before first use, rinse the baskets after every clean, and store the unit out of direct sunlight. We carry more spare parts than anyone.

Manufacturer Brochures, Manuals & Part Numbers

Need specifications, spare part numbers or more product information? See the manufacturer documents:BWT Aquabot Cordless Robot Brochure | Cordless Robot Extended Warranty

To the layperson, plumbing sizes and their names can be confusing due to the nominal sizes and naming conventions used.

This is not something we made up. Plumbers and manufacturers have used nominal (meaning ‘by name only’) sizing for decades.

Simply put, in plumbing, named sizes are often not the actual measurements of the pipe, fitting, or part. A PVC pipe called “50mm” or “2"” does not measure 50 mm anywhere. Instead, it follows nominal sizing, an internationally-standardised naming system.

Almost all fittings we use in the pool & spa industry use “pressure PVC” pipe & fittings. Do not confuse with “DWV” or other pipe & fittings and their names and sizes.

Use the Outside Diameter (OD) to check your pipe against fittings. Below is a quick reference for common spa & pool pipe sizes:

Imperial Name	Metric Name	Pipe Diameter (OD)
1/2"	15mm	~21.2–21.5 mm
3/4"	20mm	~26.6–26.9 mm
1"	25 mm	~33.4–33.7 mm
1.5"	40 mm	~48.1–48.4 mm
2"	50 mm	~60.2–60.8 mm
2.5"	65 mm	~75.2–75.5 mm

To reiterate, these are nominal sizes and are designed to fit matching fittings — not to measure what their name suggests. These are based on PVC Pressure Pipe AS/NZ 1477 Dimensions^1.

º Internal diameters vary slightly by manufacturer and class.
¹ Not all pool/spa fittings match these dimensions exactly. Some do not follow Australian or international standards. Chinese spas may use proprietary fittings.

Understanding Plumbing Sizes & Nominal Measurements

Plumbing sizes can be confusing. PVC and many other pipe systems use nominal sizes—the size is a name, not the exact measured dimension. This convention is used across most pool and spa systems and other plumbing areas so that pipes and fittings remain compatible.

Quick example: A 2" / 50 mm fitting is named for the pipe it connects to, but the pipe’s actual outside diameter (OD) is approx. 60.3 mm (typically ~60.2–60.5 mm in AS/NZ pressure pipe).

Another example: a 2” / 50mm o-ring may refer to a barrel union, etc that suits 50mm pipe. Eg: a “50mm Balboa Gasket” refers to a heater gasket that measure 74mm across, but suits a Balboa barrel union made for 50mm pipe (and the 50mm pipe does not measure 50mm either!)

Why pipe sizes don’t match the measurements

The Nominal Pipe Size (NPS) system standardises pipe dimensions so that pipes, fittings, valves, and accessories interoperate.

Plumbers work with these nominal names every day, but DIYers can be tripped up if they try to match by a tape-measure alone.

How to Measure Pipe Correctly

Pipe size is identified by:
- The pipe’s Outside Diameter (OD).
- The fitting’s Inside Diameter (ID) (socket opening).
Pipe Class / Schedule (e.g., Class 9, 12, 18 or Sch 40) relates to wall thickness and therefore the Internal Diameter (ID) and pressure rating.
The outside diameter of a fitting is not useful (wall thickness varies by manufacturer).

Important: For pool/spa work, most plumbing uses Pressure Pipe (AS/NZ standards) — not DWV. Always check OD and the pipe class against your equipment specifications.

Hose & Tube Dimensions

Common flexible hose sizes used in pool/spa systems (approximate IDs).

Imperial Name	Metric Name	Inside Diameter (ID)
3/8"	9–10 mm	~9 mm
3/4"	19 mm	~19 mm

BSP – British Standard Pipe Thread Sizes

BSP thread names are also nominal. The thread OD will not equal the nominal name.

BSP Thread Size Naming	Outside Diameter (mm / inch)	TPI
1/16" BSP	7.7 mm / 0.304"	28
1/8" BSP	9.7 mm / 0.383"	28
1/4" BSP	13.16 mm / 0.518"	19
3/8" BSP	16.66 mm / 0.656"	19
1/2" BSP / 15 mm	20.99 mm / 0.825"	14
5/8" BSP	22.99 mm / 0.902"	14
3/4" BSP / 20 mm	26.44 mm / 1.041"	14
7/8" BSP	30.20 mm / 1.189"	14
1" BSP / 25 mm	33.25 mm / 1.309"	11
1-1/4" BSP	41.91 mm / 1.650"	11
1-1/2" BSP / 40 mm	47.80 mm / 1.882"	11
2" BSP / 50 mm	59.61 mm / 2.347"	11
2-1/4" BSP	65.71 mm / 2.587"	11
2-1/2" BSP	75.18 mm / 2.960"	11
3" BSP	87.88 mm / 3.460"	11
4" BSP	113.03 mm / 4.450"	11
5" BSP	138.43 mm / 5.450"	11
6" BSP	163.83 mm / 6.450"	11

Payment & Security

We accept: Visa, Mastercard, Amex, Apple Pay, Google Pay, ShopPay, Paypal, Zip, Afterpay

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.