Ice Bath Pipe Cleaner - by Clear as Ice - LoChlor

Coming Soon!

Clear as Ice Pipe Cleaner

Clear as Ice Pipe Cleaner removes the grime and organic buildup that collects inside pipework. Use it to flush the system before a water change.

Directions

Add to the water and circulate before completely emptying the ice bath, so the pipework is flushed as you drain.

Important Points to Note

Clear as Ice by Lo-Chlor uses a non-chlorine sanitiser and is not compatible with chlorine. Because tap water can contain chlorine, Clear as Ice Chlorine Remover must be added whenever you first fill or top up your ice bath.

• Always run filtration when adding any chemical, and wait 30 minutes between each adjustment.
• Always adjust Total Alkalinity before pH.
• Know exactly how many litres of water your ice bath holds — accurate volume is essential for correct dosing.
• Test your water at least weekly (more often with heavy use) and adjust as per the guide below.
• Run filtration daily.

The Clear as Ice Ice Bath Range

Clear as Ice by Lo-Chlor is a complete, chlorine-free water care system for ice baths. The full range:

• Clear as Ice Sanitiser — kills bacteria and sanitises the bath
• Clear as Ice Alkalinity Increaser — maintains pH and water comfort
• Clear as Ice Chlorine Remover — removes chlorine on fill and top-up
• Clear as Ice Shock — chlorine-free oxidiser for fresh, clear water
• Clear as Ice Bio-Cleaner — removes biofilm from surfaces, pipework and filtration
• Clear as Ice Instant Filter Cleaner — cleans and degreases cartridge filters
• Clear as Ice pH Reducer — lowers pH for comfort and equipment protection
• Clear as Ice Cleanser — breaks down body oils and clarifies water
• Clear as Ice Hardness Increaser — protects surfaces and equipment from corrosion
• Clear as Ice Sea Minerals — magnesium, potassium and ocean trace elements
• Clear as Ice Pipe Cleaner — flushes grime and organic buildup from pipes (you are viewing this product)
• Clear as Ice De-Foamer — eliminates foam fast

Start-Up & Maintenance Guide

Always run filtration while adding chemicals and wait 30 minutes between each adjustment. Alkalinity Increaser raises both Total Alkalinity and pH, so always adjust TA first. Know how many litres your bath holds before you start.

Initial Start-Up

Fill the ice bath and start filtration. Add 12.5ml Clear as Ice Chlorine Remover per 1000 litres and run filtration for 30 minutes. Use test strips to check and adjust your water balance as per this guide.

Adjusting Total Alkalinity (TA)

Ideal range 80–120ppm. To raise TA by 10ppm, add 18g Clear as Ice Alkalinity Increaser per 1000 litres and run filtration for 30 minutes. Do not add more than 40g per 1000 litres at a time; wait 30 minutes before re-testing.

Adjusting pH & Calcium Hardness

Once TA is correct, check pH (ideal 7.2–7.6) and calcium hardness. To lower pH by 1 unit, add 43g Clear as Ice pH Reducer per 1000 litres. To raise pH by 1 unit, add 18g Clear as Ice Alkalinity Increaser per 1000 litres. To raise calcium hardness by 10ppm, add 10g Clear as Ice Hardness Increaser per 1000 litres. Run filtration for 30 minutes between adjustments and measurements.

Testing Your Water

Clear as Ice is designed to be used with AquaSpa Insta-Test Strips. Test at least weekly and adjust to the guide above. As used by SpaPro and others.

Confirm the product is correct before ordering. Contact us if unsure.

Common search terms: clear as ice pipe cleaner, clear as ice ice bath, flushes grime and organic buildup from pipes, lo-chlor ice bath. SpaPro WWDG.