Astralpool Viron, ICI, HiNRG HSI Hot Surface Igniter - Sinitride

Astralpool Viron, ICI, HiNRG HSI Hot Surface Igniter - Sinitride

Hot Surface Igniter / Ignitor used in Astralpool Viron eVo 250, 350, 450 all HiNRG 175, 250, 400 ICI 200, ICI 400 gas pool & spa heaters. Sinitride (Silicon Nitride) Material with Ceramic.

• Physically Stocked, unlike most "drop-shipping" websites.
• Shipped from VIC, NSW, WA, QLD

Astralpool Part No: 726067.

Dimensions: "Hot" SiNi part: 72mm long by 16mm. Overall Length: 115mm

Important Information:

As with all gas appliance parts, hot surface igniters should be diagnosed, installed, and tested by a suitably qualified and experienced licensed gas technician. An igniter failure is often a symptom of another issue within the heater, not necessarily a fault with the igniter itself.

Before fitting a replacement igniter, we strongly recommend inspecting the inside of the heater, ideally with a borescope, to confirm the burner, combustion chamber, heat exchanger area, and igniter mounting area are in good condition.

Burnt wiring, melted insulation, heat damage around the igniter, or discoloured terminals usually indicate excessive external heat or a heater fault. This may be caused by flame rollout, incorrect gas pressure, poor combustion, blocked burners, incorrect installation, or repeated ignition attempts.

If the underlying cause is not corrected, a replacement igniter may fail again quickly. Heat-damaged wiring or burnt connectors are not normally considered a manufacturing fault with the igniter itself.

Other Numbers Possibly Associated: 6085114, 21C01501001, 9343609046491, 9343609059231, 726067, SP726067, SKHSI

Does not suit INSNRG Heaters!

Manufacturer Catalogues, Diagrams & Part Numbers

Need exploded views, spare part numbers, product numbers, diagrams, or more product information? See the manufacturer catalogues: Astralpool Catalogue 2026 | Zodiac Catalogue 2026